BCD396XT: Scanning Trunk then Frequency Searching

Status
Not open for further replies.

TexScan780D

Member
Joined
Feb 20, 2003
Messages
984
I got this 396XT which will scan the program system then it will start frequncy searching through the scanner frequency bands and just stay in searching. How do I stop the searching and just scan the trunk program system? Below is what the display looks like

Freguency Band
Frequency
S0: 12345
GRP - - - - - - - - - - - -
 

captclint

Mentor
Joined
Dec 31, 2005
Messages
2,452
Location
Mountaintop, PA
I got this 396XT which will scan the program system then it will start frequncy searching through the scanner frequency bands and just stay in searching. How do I stop the searching and just scan the trunk program system?
You have search with scan selected on one or more of the 10 custom searches.
To Edit a Custom Search, press Menu. Scroll to 'Search for...' and press E/yes.
Scroll to 'Edit Custom' and press E/yes.
Scroll to the custom search you want to edit (1-10) and press E/yes

Scroll toSearch with Scan and press E/yes
Scroll toSet Lockout and press E/yes. (Used for 'Search with Scan' only).
Scroll to 'Lockout' and press E/yes to save and exit.

You may need to do this for all 10 custom searches.
 

UPMan

In Memoriam
Premium Subscriber
Joined
Apr 19, 2004
Messages
13,296
Location
Arlington, TX
Or, while it is in the custom search, pres F+L/O, L/O to lockout the search.
 

TexScan780D

Member
Joined
Feb 20, 2003
Messages
984
Thank you the search is lock out and scanning, but I think that I accidentally lockout the fire group. So how do I check if I locked out any of the impotent groups?
 

TexScan780D

Member
Joined
Feb 20, 2003
Messages
984
I went through and lock out the custom search, but now I am getting search call Special, Military Air. Looks like this scanner is setup to search pre set bands.
 

TexScan780D

Member
Joined
Feb 20, 2003
Messages
984
I went through and locked out the custom searches. When I turn the scanner back on, the scanner will scan the trunk system then start the service searches, so then I Function + L/O which lock the searches out. When I turn the scanner back on, scanner will scan the trunk system then the service searches.
 

mule1075

Member
Feed Provider
Joined
Jan 20, 2003
Messages
3,911
Location
Washington Pennsylvania
Press lockout twice to permanently lockout the service searches. If you only hit lockout once it only temporarily locks then out.

Sent from my Z750C using Tapatalk
 
Status
Not open for further replies.
Top