I assume you mean that you have programmed the CONTROL CHANNEL frequencies. That is if the system you are programming is Motorola. If the system is EDACS or LTR, then you'd need to program them all. It would help us if you told us what system you are programming, and perhaps provided a link to it in our DB.i have set up frequencies to channels onto a bank
There are no "programmed talkgroups" unless you programmed them. Do note that you need to set the bank to CLOSED so that it only picks up the programmed TGs. Go to the bank, press FUNC . to toggle between open and closed.but i want to scan a certain talkgroup versus all of the programmed ones
hello again, i am located in el paso, texas ( el paso county ). im sorry, link yo your system in db ? can you explain please ? if the system has rebanded, how must i tell my scanner this ? i am trying to scan my local fire,ems and hospital talk groups. all was working fine till 1 week ago, i lost scanning capability on my selected talkgroups.now im lost, any info will be appreciated -
Here is a link to El Paso County.hello again, i am located in el paso, texas ( el paso county ). im sorry, link yo your system in db ? can you explain please ?
Dick H posted 4 frequencies which are different than what is listed in the DB. The frequencies he posted are typical after a rebanding. Perhaps the DB needs to be updated. It looks to me like if you change to the 4 frequencies he provided, you will be good.if the system has rebanded, how must i tell my scanner this ? i am trying to scan my local fire,ems and hospital talk groups. all was working fine till 1 week ago, i lost scanning capability on my selected talkgroups.now im lost, any info will be appreciated -
You only need the 4 control channel freqs. Talk groups are not affected by re-banding.
859.2500
860.1500
860.2000
860.2500