A little new to SDR trunk I'm trying to figure out NBFM I have the alias setup right it's like a dead channel I'm not sure if it's in the gain control or the squelch.. I had the gain setting on auto. I'm using RTL V3 dongle two of them. The frequency I was trying to monitor. Also tried Noaa weather with no results.. but can pick it up on my police scanner.. anybody have any suggestions? Thanks.
So just focusing on your problem, creating NBFM channels (within the same sample rate) and only hearing one.
Each NBFM created needs a different talk group identifier (Talkgroup to Assign) number.
Otherwise you'll only hear one transmission, with noaa you will only hear the first o e you click play on as it is a constant transmission.
So if you added a bunch of conventional NBFM channels for with a sample rate of 2.048 between 153.6 - 155.6, and all your talkgroup identifiers are set to the default 1, it's only going to pick up one active transmission at a time.
I added 32 conventional frequencies in that sample rate range , took a minute to figure out why it was only catching one frequency at a time
Hope this helps