SDR Trunk Programming Control Channels

walt991

Member
Joined
Dec 29, 2003
Messages
102
How do I program the following control channels into SDR Trunk .050 alpha 4? I can get it to work just fine if I only add the active control channel in the playlist, but it doesn't work if I add the other three secondary control channel frequencies. My frequency rotation delay is at 200ms in the playlist.

Active- 853.8625.

Sec- 853.2375 853.3625 853.6125
 

GTR8000

NYS Database Guy
Database Admin
Joined
Oct 4, 2007
Messages
9,314
Location
BEE00
200ms is too short (see link below), increase it to at least 500ms if not 1000ms. That parameter determines how quickly the software will move on after not finding an active control channel, but if it's not allowed to dwell long enough, it won't be able to obtain a lock. Setting it to a full 1 second will give it enough time to obtain that lock.

 
Top