SDS100/SDS200: SDS100 & 200 Bluetooth question

[Dafe1er]

I use these two for wireless audio use of my scanners and have notice that when using the setup with the SDS100 I get clear audio but, when I use the setup with my SDS200 I get clear radio traffic with what sounds like lite static during the transmission of the audio. Is there something in the SDS200 settings I might need to change? I normally don't use the 200 like this but, on this raining day, I found something to occupy my time...lol
Thanks.

 

[jtwalker]

Are either of these two BT device plugged into AC current when you get this feedback?

 

[n1chu]

It could be the SDS200’s AC power supply is causing it. If you power the SDS200 from 12 volts DC does it still happen?

 

[Ubbe]

Check if the static follows the audio level by quickly changing the volume down to zero while the BT are still transmitting. Are there still static in the background?

Do you have that extra grounding piece stuck between the inner frame and the lid, then push on lid and check if it that infamous grounding issue that cause the static, especially if it sounds more like a high speed computer datasignal.

/Ubbe

 

[donc13]

I used to have the same problem with my SDS200. I installed a ground loop eliminator... Problem gone.

On Amazon,

BESIGN Ground Loop Isolator. $9.99

 

[Dafe1er]

It only happens using the SDS200 so, it is probably the plug. I will also look into the ground loop isolator.

Thanks everyone.

 

[JoeBearcat]

I use these two for wireless audio use of my scanners and have notice that when using the setup with the SDS100 I get clear audio but, when I use the setup with my SDS200 I get clear radio traffic with what sounds like lite static during the transmission of the audio. Is there something in the SDS200 settings I might need to change? I normally don't use the 200 like this but, on this raining day, I found something to occupy my time...lol
Thanks.

Which audio jack are you plugged into on the 200?

 

[richardbritt]

What's the manufacturer and model of the bt device? I assume that's a amplified speaker. Or do you have a link to Amazon etc where it can be bought? I am using a bcd436hp and it's hard to hear when driving my pickup. No Bluetooth radio in the truck. My car I just use the external audio input in the car radio.

Regards Richard

 

[richardbritt]

It's a Noxgear 39g available on Amazon for $65

I ended up doing a Google image search

Regards Richard

 

[n1chu]

What’s a compatable transmitter for the 39g? (I see the 39g but isn’t that just half of the setup? Doesn’t it need a transmitter… what you plug into the 200?

 

[doc62]

I use this plugged into the headset port.

Amazon.com

Haven’t had any issues.