We have a new DMR Tier 3 system in our county and I'm the administrator. I have entered into the scanner the Frequency and the LCN (in DMR Tier 3 world it is called a TSCC) and I only hear slot 2 of the conversations. I really need help with this.
This probably is the issue. Uniden LCN's are one lower than the channel numbers DSD+ shows (after dividing the DSD+ numbers by 2 since each slot is numbered in DSD+). Uniden appears to use LCN =0 as the first valid LCN. For the Henry county system try reducing the LCN value by one for each channel in the SDS200 and see if it tracks better. If not, use the LCN finder detailed in the SDS200 manual on page 50. I used the LCN finder on a tier III system here and it worked well. The site data is below for reference.This probably isn't your issue, but are you sure Uniden uses the same numbers/formula as the TSCC?