Sentinel 436 Favorites lists ???

[k8mab]

Created six favorites lists 0 thru 5.. When scanner boots up i can see all six loaded... When display comes on it only shows 0 thru 3 and no response when keys 4 and 5 are pressed.. Profile shows all 0 thru 5 ON...
Any ideas what im missing...

 

[redburgundy]

Edit Profile|Scan Selection|Monitor|On

 

[k8mab]

Yes, they are all monitor on

 

[ofd8001]

Try shutting off 0 through 3 and see what happens. You might see "Nothing to Scan". If so, review the following post which should give you some things to check.

http://forums.radioreference.com/uniden-thread-archives/283404-x36-nothing-scan-checklist.html

If Location Control is On for FLs 4 and 5, it might be that things in these FLs are out of range. Thus the scanner has turned the FLs off.

 

[k8mab]

Reviewed "nothing to scan" check list - no issues... Deleted FL 4 and 5, created a new FL 4, and 5 (same as previous 4 and 5) and loaded one at a time !!WORKED!! go figure... Is it possible you have to load one FL at a time...

 

[ofd8001]

I don't believe that loading multiple Favorites Lists is a problem - I've got 15 FLs that are all written at the same time. Doesn't seem to be an issue, though some of those FLs are for trip destinations.

It could have been one little setting in FL4 and FL5 that was fixed during the re-creation.