• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Setina PB400 14-16 Sierra

Status
Not open for further replies.

843sierra

Newbie
Joined
Jun 28, 2017
Messages
4
Location
charleston SC
anyone know where to buy the Setina PB400 push bumper for 14-16 Sierra? I saw that member 8859 has one on his but haven't heard back from him. Ive contacted Setina and they gave me their distributors but nothing back from them either. anything will help thanks. or if anyone has a used one let me know! if you have any posts of your truck bumpers post them!!
 

awd

Member
Joined
Mar 13, 2017
Messages
19
You should be able to get them from a lot of emergency vehicle supply stores. One that comes to mind is Sirennet.

I have the Go Rhino push bumper on mine. Wish I would have gone with the Setina since it's aluminum vs steel, and the bottom cross tube on my Go Rhino sometimes collects water and drains rust out the side.
 

843sierra

Newbie
Joined
Jun 28, 2017
Messages
4
Location
charleston SC
ive looked on all the sites like dana safety supply. chief supply, west chatham, and lawmans safety, and not one of them have responded to any of my emails.
 
Status
Not open for further replies.
Top