• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Silverado install

Status
Not open for further replies.

iceman977th

Member
Feed Provider
Joined
Dec 25, 2009
Messages
388
Location
Catlettsburg, KY
I'm looking at a 2003 1500 LS extended cab pickup. No center console, push button 4WD, etc. Planning on mounting a scanner (or maybe two, both probably RS) & CB in it, along with room for lights/siren (for the fire department). Anyone able to suggest a console for me to use to mount everything in, or would I be better off building my own console to mount everything in? I'd appreciate any tips. Thanks!
 

donny612

Member
Joined
Sep 16, 2004
Messages
44
Location
New Bern, NC
I'm looking at a 2003 1500 LS extended cab pickup. No center console, push button 4WD, etc. Planning on mounting a scanner (or maybe two, both probably RS) & CB in it, along with room for lights/siren (for the fire department). Anyone able to suggest a console for me to use to mount everything in, or would I be better off building my own console to mount everything in? I'd appreciate any tips. Thanks!

If you look in the forum section in "Pictures of your shack..." there are several installs in Silveradoes and those types of vehicles.
 
Status
Not open for further replies.
Top