BCDx96XT: Smartnet II Digital issue after 1.07.03 Upgrade

Status
Not open for further replies.

3Juliet001

Member
Premium Subscriber
Joined
Feb 16, 2011
Messages
10
Location
Newport Beach, Caliornia
I just upgraded my 996 to 1.07.03 and now I am getting digital burst and trouble decoding audio on the Orange County CCCS Smartnet II System.I get audio 75% of the time, digital noise 25%.

I have adjusted all of the waiting time, threshold and filter settings - to no avail. It worked fine before, and I have no problem on my Motorola radios.

Any advice?
 

scottyhetzel

Member
Joined
Nov 3, 2011
Messages
1,409
Location
Palm Springs Area / OrCo
I just upgraded my 996 to 1.07.03 and now I am getting digital burst and trouble decoding audio on the Orange County CCCS Smartnet II System.I get audio 75% of the time, digital noise 25%.

I have adjusted all of the waiting time, threshold and filter settings - to no avail. It worked fine before, and I have no problem on my Motorola radios.

Any advice?
There is a post that shows what the factory settings are for digital, this would be a good starting point. If you have your freq. on arcxt software you could default the unit. Than load your file to see if that helps.
 
Status
Not open for further replies.
Top