Spectrum Shift Threatens Radio Communications

Status
Not open for further replies.

RockyNCC

Member
Joined
Jan 12, 2003
Messages
6
Reaction score
0
Location
Franklin, Tennessee
The Washington Post of July 11 contains a long article(Page B7) about the upcoming frequency trade between NEXTEL and Public Safety. The article goes on to say that Fairfax County will be the first jurisdiction in the Washington Metro area to switch (date not cited) and that while this shift takes place,county by county, inter-county communications for public safety will be in peril! Does any one have timing of this switch and what is the imppact on my PRO-96 programming?
 

n4voxgill

Silent Key
Joined
Dec 15, 2000
Messages
2,588
Reaction score
2
Location
New Braunfels, TX
There is not a time table that shows this system changes on this date and that system on a certain date. When systems change depends on the results of negotiations between several parties. There could be 4 or more parties involved in each sytem:
1. Nextel is involved with reaching financial agreement and clearing their frequencies in 851 to 854.
2. The public safety agency that is impacted who must reach an agreement with Nextel and approval of TA.
3. The Transition Administrator (TA) can be invloved in mandatory negotiation if voluntary talks don't work and then approving final offers.
4. Any other commercial license holder in the 851 to 854 MHz that must be relocated.

This can be complicated and is worked out by individual sysems.

No one knows if or how our scanners can handle the rebanded systems. Keep your fingers crossed.
 
Joined
Aug 17, 2004
Messages
59
Reaction score
0
ooohhh nooo... :shock:

After you dump 500$ on a scanner less than a year ago these are the last kind of posts you want to see :cry:
-Wes
 

BoxAlarm187

Level 6 RR Member (Since 1998)
Premium Subscriber
Joined
Mar 19, 2003
Messages
1,742
Reaction score
239
Location
Old Dominion
To look at a 10-page thread that is dealing with this very topic (but on a nationwide level, not just Fairfax County), click here.

Also, to further expand on what Gill wrote, it's anticipated that the Uniden 296D, 796D, 396T, and 246T and the RS Pro-96 and Pro-2096 will be able to re-flashed to accept these new changes. However, as Paul Opitz, the Uniden guy here on RR said, it will be impossible to verify this until the first systems are on-line and can be tested with these scanners.
 
Status
Not open for further replies.
Top