BCD436HP/BCD536HP: Stuck on Site Hold/Dept

[hypersight]

I just purchased a brand new 436hp. I have been listening to it all day and exploring how it works. I have been listening to many different systems and i was loving this scanner. However I have come across a problem and I hope someone could help. I was monitoring a system for a while and I decided I wanted to monitor a different system but I came across a problem. The scanner is locked on Site Hold and the scanner won't let me take off the "Hold" on the site and I am unable to change the System, Dept, or Chan. I tired pressing the Site button but it does not release the Hold. the words "SITE HOLD" remains at the top of the screen. I can Hold and "unHold" the System and Chan just fine, it's just the Dept that I can't release off of hold.

 

[doctordialtone]

I can Hold and "unHold" the System and Chan just fine, it's just the Dept that I can't release off of hold.

Scan Hold

Channel Hold

Press Channel to hold on a Channel. You can now scroll all Channels. Press Channel to release Channel Hold.

Department Hold

Press Dept to pause for 2 seconds then hold on any Department. (Department is reversed in the display for Pause Mode) Double press Dept to hold without a pause. Press Dept then quickly scroll to any Department in Pause Mode. Double press Dept to release Department Hold.

System Hold

Press System to pause for 2 seconds then hold on any System. (System is reversed in the display for Pause Mode) Double press System to hold without a pause. Press System then quickly scroll to any System in Pause Mode. Double press System to release System Hold.

Site Hold

Press Func then Dept to hold on any Site in the current System. Press Dept then quickly scroll to the Site in Pause Mode. (Site is reversed in the display for 2 seconds in Pause Mode) Press Func then Dept to release Site Hold. Manual: Easier to Read BCD436/536HP Digital Scanner Manual

 

[hypersight]

Thank You for your quick response doctordialtone. I have turned off the scanner after I posted this question and now everything if fine after I turned it back on, but if this happens again, I will know what to do! Thanks again.