BCD325P2/BCD996P2: Systems Auto-Copying in scanner

Status
Not open for further replies.

ME343

ME/NH/VT DB Admin
Database Admin
Joined
Jul 17, 2007
Messages
539
Location
Farmingdale, ME
It seems my scanner is auto-copying all the systems I have programmed. I program it by PC and than go back to fix something in the system is in there twice even after the PC program overwrote the system with the same name. Very annoying when running a feed and having to fix issues daily.
 

ME343

ME/NH/VT DB Admin
Database Admin
Joined
Jul 17, 2007
Messages
539
Location
Farmingdale, ME
I usually have it set to overwrite. But just today I had to fix an issue and did it from the scanner directly. and noticed the systems were copied and deleted them from the scanner and than i went back an hour later to adjust a setting via the scanner directly and the duplicates were back
 
Joined
Apr 18, 2009
Messages
6,170
Location
CT
Download the file from the scanner - delete the duplicates - SAVE - Upload to scanner and REPLACE any existing system (duplicates.)
 

pb_lonny

Member
Joined
Jul 2, 2012
Messages
1,916
Location
Tasmania
Data only gets in the scanner if you program it that way, check your settings in your software.
 
Status
Not open for further replies.
Top