Target Frequencies

[BillQuinn]

anyone got the frequencies for target at the brandywine town center? thanks.

 

[jaymatt1978]

Even though I have it listed for Bergen County NJ the frequencies on the link below are good for Target stores NATIONWIDE:
http://bergenscanner.com/malls.shtml#target

 

[ecps92]

Target

Go to http://wireless2.fcc.gov/UlsApp/UlsSearch/searchLicense.jsp
put in the FRN of 4495776 this will get you all the Target Licenses [1000+]

Hard to narrow it down, except pick one at a time.

I already tried the GEO Search and restrict by State with No Luck

Also give this a try
http://www.scancapecod.us/wiki/index.php/Common_Standard_Department_Store_Channels

Post the DCS tones when you find them

anyone got the frequencies for target at the brandywine town center? thanks.

 

[cubn]

My local Target has ch4 as 467.900 (D205) whereas the lineup in jaymatt's link lists ch4 as 467.8750 (D244).

There's a really good Target frequencies thread going in the New Jersey forum right now: http://www.radioreference.com/forums/showthread.php?t=87740&highlight=target
That thread lists the Target channel plans and pl/dpl tones.

 

[ecps92]

There has been some question as the the accuracy of some of the Channel numbers and usages as of late.

My local Target has ch4 as 467.900 (D205) whereas the lineup in jaymatt's link lists ch4 as 467.8750 (D244).

There's a really good Target frequencies thread going in the New Jersey forum right now: http://www.radioreference.com/forums/showthread.php?t=87740&highlight=target
That thread lists the Target channel plans and pl/dpl tones.

 

[Audiodave1]

When I lived by there they used plan 2 on the Bergen Scanner site.

Also see Brandywine town center and Regal Theater channels in the dB

 

[ecps92]

Target is a Target for Scanning

Seems altho Corporate tried to use a standard template, some stores deviate

When I lived by there they used plan 2 on the Bergen Scanner site.

Also see Brandywine town center and Regal Theater channels in the dB

 

[Audiodave1]

Just returned from a trip to Target (Needed more Christmas lights) and this is the bandplan for that store

467.7500S DPL 115 Target Ch 1 Ops & Automated Paging
467.7750S DPL 072 Target Ch 2 Admin
467.8750S DPL 244 Target Ch 4 Loss Prevention
467.9250S DPL 155 Target Ch 3 Talkaround

 

[ecps92]

Targer

Seems we have a new or Alt. Ch.04 now

Just returned from a trip to Target (Needed more Christmas lights) and this is the bandplan for that store

467.7500S DPL 115 Target Ch 1 Ops & Automated Paging
467.7750S DPL 072 Target Ch 2 Admin
467.8750S DPL 244 Target Ch 4 Loss Prevention
467.9250S DPL 155 Target Ch 3 Talkaround

 

[jaymatt1978]

For those using scanners with dynamic memory, BC246T,BC396T,SC230, etc I suggest you make a system put each plan in a different group and go fromk there. Some of the stores mix and match= the frequencies to= eliminate interference from other stores.

 

[W4KRR]

Even though I have it listed for Bergen County NJ the frequencies on the link below are good for Target stores NATIONWIDE:
http://bergenscanner.com/malls.shtml#target

Great web site guys; I've been looking for the "other" UHF channel plan for Target stores. Many of the Targets here in south Fla. use plan 2, but I was in a store where my scanner was quiet even though there was radio activity, so apparently they use plan 1, but I will try to confirm.

 

[ecps92]

Target

There are a few different channel plans out there.
http://www.scancapecod.us/wiki/index.php/Common_Standard_Department_Store_Channels

And then some stores the bootleg GMRS

Great web site guys; I've been looking for the "other" UHF channel plan for Target stores. Many of the Targets here in south Fla. use plan 2, but I was in a store where my scanner was quiet even though there was radio activity, so apparently they use plan 1, but I will try to confirm.