05-21-2019
Attention NX-5000 group members
(need in the next 2 hours <by 10pm ET the latest>)
Without getting into PRICES, this is a question on a technical level only please.
I need via email (those of you who have my email) technical concerns on the NX-5000, NX-3000 that you can discuss with CORP JVCKenwood.
I have been asked to get a list of items and scenarios to back up the claim (the issue),
That you the users would like to have addressed at a special meeting.
Items like, power out is not what it should be out of the box
P25 SCANNING, Scan timing is slower than this radio X,
DMR items to improve (no, not LCP and other Motorola closed proprietary things, that's not going to happen).
Things of technical nature is what I am looking for, like the ability to FPP the TX contacts in DMR, and PTT SELCALL in NXDN.
Technical items that you experience that needs refinement or added.
Please get this to me asap before 10pm ET. 05-21-19 US Date
Thanks
Evans Mitchell
Kd4efm1@gmail
Anything after that here will be considered, but may not make my report which is due by 11:59 PM Florida Time.
This is going to some high up personnel who are asking for my input that is going before Corp JVCKenwood.
SERIOUS MATTERS ONLY PLEASE.
I have a list already such as p25 scan, Priority Scan (on and off issues), Power not what it should be out of the box.
anything else, send to me asap to my email.
What I am looking for:
Model,
Firmware version (currently should be 3.00 or 3.10),
Description of the issue,
How to duplicate it
What does it cause or is the cause and effects?
OR
What function or item can be improved, P25, DMR, NXDN, ANALOG, LTR
--> (NO MOTOROLA/HYTERA/TAIT "DMR" DO THIS OR DO THAT'S PLEASE, I will not pass that along. Dead horse) Kenwood is OPEN ETSI DMR SOURCED.
Attention NX-5000 group members
(need in the next 2 hours <by 10pm ET the latest>)
Without getting into PRICES, this is a question on a technical level only please.
I need via email (those of you who have my email) technical concerns on the NX-5000, NX-3000 that you can discuss with CORP JVCKenwood.
I have been asked to get a list of items and scenarios to back up the claim (the issue),
That you the users would like to have addressed at a special meeting.
Items like, power out is not what it should be out of the box
P25 SCANNING, Scan timing is slower than this radio X,
DMR items to improve (no, not LCP and other Motorola closed proprietary things, that's not going to happen).
Things of technical nature is what I am looking for, like the ability to FPP the TX contacts in DMR, and PTT SELCALL in NXDN.
Technical items that you experience that needs refinement or added.
Please get this to me asap before 10pm ET. 05-21-19 US Date
Thanks
Evans Mitchell
Kd4efm1@gmail
Anything after that here will be considered, but may not make my report which is due by 11:59 PM Florida Time.
This is going to some high up personnel who are asking for my input that is going before Corp JVCKenwood.
SERIOUS MATTERS ONLY PLEASE.
I have a list already such as p25 scan, Priority Scan (on and off issues), Power not what it should be out of the box.
anything else, send to me asap to my email.
What I am looking for:
Model,
Firmware version (currently should be 3.00 or 3.10),
Description of the issue,
How to duplicate it
What does it cause or is the cause and effects?
OR
What function or item can be improved, P25, DMR, NXDN, ANALOG, LTR
--> (NO MOTOROLA/HYTERA/TAIT "DMR" DO THIS OR DO THAT'S PLEASE, I will not pass that along. Dead horse) Kenwood is OPEN ETSI DMR SOURCED.
