dallascowboys
Member
I have the 436, I put in some TGID'S but do not hear anything do I need to turn something on in Sentinel what am I missing ? hope someone can help on this matter
Thanks
Thanks
More than likely, the service type for the added frequencies is not active. Unless you changed it, the default for a manually added TGID, or conventional channel frequency, is Custom 1. Make sure that whatever service types you selected for your manual entrees are active.Hope this is the info you need, went into Sentinel turned on the Dothan P25 PHase1 System TGID'S, while listened for a bit I found some TGID'S, so went back into Sentinel and put them in and turned off TGID'S, I do not hear any of the new talk groups that I put in was I supposed to leave the talk groups on ? thanks for the reply back.
But did you verify whether the Service Type was enabled?added to an existing department, Dothan p25 TGID was a Dothan talk group so I added it to the Dothan P25 site.
HmmDid not create a new system added TGIDS to the existing department, and service type is enabled, can hear the Dothan PD but not the talk groups I put in. Thanks for getting back to me on this, I have doubled checked everything can not figure this out.