Haley
Member
- Joined
- May 28, 2005
- Messages
- 1,132
I know that this will come off wrong----no matter HOW I word it, so here goes. First off I have multiple scanners from multiple companies, so I am not brand loyal. But I have the biggest love/hate of the 436, when it works, it works well. And to my point, can someone explain to me why the damn SD card sits below, the batteries. About one out of every 5 times I change my batteries I get the "SD card access error". I know to let it fully power down, so that's not the issue. The card is not corrupt, the card has to be seated "just right". I am ridiculously careful (and paranoid) at this point to change batteries. I am too the point of just getting rid of it. I have done the Provoice and DMR upgrades too it , I am really thinking about dumping it for the TRX 1. Just tired of dealing with it.
Let me say again, I like Uniden , and my still favorite scanners of all time are the 330/346/396 series (especially the 2 xt's). But I am getting fed up with this. Heck I am afraid even a small knock or bump may unseat the thing. Was this problem addressed with later serial numbers? Mine starts with 4800xxxx. And before anyone suggestions the 325 , as much as I like the 125 case-------they should have used the 396xt case. Anyway, hope this doesn't come off wrong, does anyone have any suggestions or ideas, too prevent this? I should note, I never have this problem with the GRE/RS/Whistler models. Anyway, everybody have a Merry Christmas (and everyone at Uniden also-)! Mike
Let me say again, I like Uniden , and my still favorite scanners of all time are the 330/346/396 series (especially the 2 xt's). But I am getting fed up with this. Heck I am afraid even a small knock or bump may unseat the thing. Was this problem addressed with later serial numbers? Mine starts with 4800xxxx. And before anyone suggestions the 325 , as much as I like the 125 case-------they should have used the 396xt case. Anyway, hope this doesn't come off wrong, does anyone have any suggestions or ideas, too prevent this? I should note, I never have this problem with the GRE/RS/Whistler models. Anyway, everybody have a Merry Christmas (and everyone at Uniden also-)! Mike