• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

TID DMR Radios (How to make them simplex)??

Status
Not open for further replies.

cdesigns

Member
Joined
Feb 4, 2009
Messages
1
Location
Clermont, FL
I have (2) TID TD-DP580 DMR radios, I have both programmed the same, when I turn them ON I can make them communicate with each other if I press the PTT around 3 seconds or less from end of transmission of the other radio, but if I wait more than 5 sec after receiving a call and I press PTT the other radio never receives anything. Is like they go into an Hibernate mode after 3-4 seconds and wont wake up until I press a button or the PTT on them, only then they will receive the call from the other radio, both radios do the samething. They just go into a hibernate state after 4 sec of receiving a first call, and never again receive anything until I press a button on them.
 
Status
Not open for further replies.
Top