• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

TK 350 help

Status
Not open for further replies.

johnando89

Newbie
Joined
Apr 18, 2014
Messages
1
Hi guys,

hoping someone can help am totally new to radio communication but have recently had some radios for use in our bar for busy nights i have 6 units with charger however some are not working..

2 work fine
2 units been constantly when you turn on and only in charging unit turn on (assume batter?)
the other two turn out and can see LCD on top but when press PTT button make one beep like when turn on red lifght flashes and fail to do anything?

just wondering if anyone has any ideas mainly the two that turn on but just beep when press PTT as they seem fine but wont transmit also when they receive any signal is just a constant beep

thank you in advance

John
 

WX9EMS

Member
Joined
Jun 23, 2010
Messages
155
Location
Lake Geneva, WI
Sounds like the batteries have reached their end of life. If you have good batteries from other radios, swap them to test the radio in question.
 
Status
Not open for further replies.
Top