• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

TK-3501 amber light on power up; can't be programmed

Status
Not open for further replies.
D

dipstix

Newbie
Joined
Mar 24, 2020
Messages
2
I've got a pair of TK-3501-E PMR446 radios, one of them works properly and the other does not. These radios are supposed to beep when powered on and then work properly, but one of them displays a weird behaviour when powered on: most of the time, it shows an amber light, then it rarely beeps. Sometimes it doesn't do the amber light thing and goes straight to beeping, and then sometimes it doesn't beep at all. It always works properly after this, according to the default channels that are detailed in the manual.

It's not the battery, because I've switched them around and it doesn't help. I've also tried the reset procedure and the programming procedure as they are explained in the manual, and it doesn't do anything.

This one radio can't also be programmed, the programming software KPG-173D shows a communication error, while the other radio works okay.

Please advise on what could be wrong about this radio, thank you.
 
D

dipstix

Newbie
Joined
Mar 24, 2020
Messages
2
Well, the problem was a bit silly, and I feel ashamed to admit it: after opening the radio, I noticed the contacts of the microcontroller (which contains the memory) had corroded a little, probably because of water damage. After cleaning them up, now the radio works properly.
 
Status
Not open for further replies.

Similar threads

S
HYT TM-610 Programming
Replies
3
Views
353
speedway_navigator
S
niceguy71
anyone able to get a CB antenna to work on a Jeep TJ it's like the old CJ's??
Replies
15
Views
716
niceguy71
niceguy71
Falcon9h
Tytera Unprogrammed upon power up
Replies
1
Views
291
AK9R
AK9R
N
P400 Programming
Replies
8
Views
833
N4FLI
N
millam
dsd audio
2
Replies
21
Views
2K
StankLewis
S
Top