• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

TK-370G - KPG-56D V2.0 to 4.4 - Etc

Status
Not open for further replies.
N9NU

N9NU

N9NU
Joined
Dec 4, 2007
Messages
1
Location
Plano, IL
I was wondering if anyone had information on which version of programming software I need for a TK-370G (no I, E, N or A after it).

I know it's KPG-56D, however, I have heard a certain version (2.1 - 4.4) might be needed to work. I have no way of knowing the firmware or anything else that is contained in the EEPROM for obvious reasons. Below is what I do know:

Model: TK-370G
Serial: 10600825

There is a '-1' below the model number as shown in the picture below, and I do not know what that refers to.

370g.jpg


I have all the versions of the software from 2.0 - 4.4


Tnx

de N9NU es 73
 
pddispatcher

pddispatcher

Member
Joined
Nov 8, 2004
Messages
11
KPG56D Windows Version will work best.

Also the -1 is the split of the radio

-1 does certain freq bandsplit while -2 does another part of split.
 
Status
Not open for further replies.

Similar threads

SuperChicken80127
TK-280 Can Receive, Not Transmit, Screen shows all LED Dots
Replies
6
Views
707
woodtrol
woodtrol
8
Kenwood TK-5210-K3 Beginner Questions (Michigan)
Replies
6
Views
820
dryfb
dryfb
O
Problem programming TK-7102H
Replies
8
Views
854
arlo
A
K
Kenwood TK-880 versions?
Replies
8
Views
1K
mmckenna
mmckenna
B
Kenwood TK-880 firmware compatibility
Replies
5
Views
857
bbo14
B
Top