• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

TK-6110 internal speaker wattage

Status
Not open for further replies.

Anderegg

Enter text in this field
Premium Subscriber
Joined
Mar 7, 2010
Messages
1,827
Location
San Diego
Anyone know what the internal speaker audio output power is? I see reference to 10 watts in the brochures, but it looks awful tiny to produce that much power.

Paul
 

mmckenna

I ♥ Ø
Joined
Jul 27, 2005
Messages
10,919
Location
SNCZCA01DS0
The external speaker connection on the rear 15 pin connector is 10 watts output into a 4Ω load.

The TDA1519A audio amplifier is good for up to 22 watts into a 4Ω load.

The service manual doesn't say anything about the power output into the front speaker.

Schematic does show a 2.2Ω 2 watt resistor in line with the front speaker. My gut would say the output is less than 2 watts.
 
Status
Not open for further replies.
Top