Trouble with installing RTL2832U+R820T win7 64-bit

Status
Not open for further replies.

RelativeCode

Member
Joined
Mar 22, 2014
Messages
6


I'm working under Win7 64-bit. I tried to install the drivers RTL2832U+R820T with Zadig.




While the driver is installed but I can not do it using SDRSharp software. When I open SDRSharp, can not find RTL / USB.



Please guide me where is the problem?
 

Attachments

n0nhp

Member
Premium Subscriber
Joined
Dec 1, 2005
Messages
727
Location
Grand Junction
Hit the down arrow next to the "Other(Sound card) and pick RTL-SDR / USB.

I tried to get a screen shot but the dialog box closes as soon as I press any other buttons.

Then hit play and you should have success.

Bruce
 

mikewazowski

Forums Manager/Global DB Admin
Staff member
Joined
Jun 26, 2001
Messages
11,022
Location
Central Ontario
RelativeCode, your post should really be in the Software Defined Radio forum. If you'd like a mod to move it, use the Report Post icon in the upper right of your first post.

We don't move posts out of the New User forum unless the OP requests it.
 

RelativeCode

Member
Joined
Mar 22, 2014
Messages
6
RelativeCode, your post should really be in the Software Defined Radio forum. If you'd like a mod to move it, use the Report Post icon in the upper right of your first post.

We don't move posts out of the New User forum unless the OP requests it.

Sorry but I can't find "Report" button, for report move to "Software Defined Radio forum.
 

mikewazowski

Forums Manager/Global DB Admin
Staff member
Joined
Jun 26, 2001
Messages
11,022
Location
Central Ontario
It's the red and white triangle in the upper right corner of your post.

I saw your request in the thread and have already moved it for you.
 

rbm

Member
Joined
Jan 25, 2005
Messages
1,394
Location
Upstate New York
I'm running some of those dongles on a Win7 64bit machine.

Here are a few things that may help you.

When you run zadig, you should run it in 'administrator' mode.

When you start SDRSharp, you should select 'RTL-SDR / USB' from the drop down box.

Go to Control Panel, Device Manager
Under Universal Serial Bus Devices ..........
Look for 'Bulk-In, (Interface 0)
Make sure it shows the libusbx.org driver.

If so, you should be good to go.
If not, then the driver isn't installed.

If you are saying that you can't see "RTL-SDR / USB" in the drop down box ..

Then edit the 'SDRSharp.exe.Config' file and look for this line (between the quotes) near the bottom. (SDRSharp must NOT be running when you do that.)
"<add key="RTL-SDR / USB" value="SDRSharp.RTLSDR.RtlSdrIO,SDRSharp.RTLSDR" />"

Rich

 
Last edited:
Status
Not open for further replies.
Top