• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Trunking scanlist

Status
Not open for further replies.

robertpearsall

Member
Premium Subscriber
Joined
Jun 30, 2007
Messages
384
Location
Edison, NJ
Need help with trunking scanlist trying to program multi systems to one scanlist just cant get it to work i have trunking and multi system checked made new zone with whats going into zone list and it still does not scan if i goto channel in that zone it scans channels from the zone that channel is in.I am trying to do this with a xts2500 any help would be appreciated
 

W0JJK

Member
Joined
Jan 25, 2006
Messages
555
Each personality has a scan list assigned to each under the Scan tab on the personality. Make sure that is your Talkgroup, non priority scan list.
 

robertpearsall

Member
Premium Subscriber
Joined
Jun 30, 2007
Messages
384
Location
Edison, NJ
so to get a talkgroup in multi scanlist i need to add trunking pers. with scanlist number for each list talkgroup is in
 

W0JJK

Member
Joined
Jan 25, 2006
Messages
555
Your current trunking personality for those systems just need to have that new scanlist assigned to it.
 
Status
Not open for further replies.
Top