TRX-1 display

Status
Not open for further replies.

safetypro79

Scanning since 1967
Premium Subscriber
Joined
Jan 24, 2005
Messages
443
Location
Anchorage-Alaska, Boise-Idaho, Salem-Oregon
I am a new owner of a TRX-1 but not new to the hobby or radios.

radio is not scanning my local P25 and Conv freqs they have been

My display reads:

Multi Dispatch
Channel psDr
NEW CONV

and nothing on rx. when I change to

when I turn the raion back on it revert t this display?
 

Ubbe

Member
Joined
Sep 8, 2006
Messages
8,944
Location
Stockholm, Sweden
The lists that the display show are the ones that are scanned. Check EZScan in advanced tab that you have choosen "Scan sets require scan lists to be enabled".

Could also be a bad SD card. Try and reformat the SD card in a PC using the SD Formatter program that you can download and let EZScan prepare and configure the card before using it in the scanner.

We are many that have received bad SD card from the start that creates many strange things with the scanner and are difficult to solve when you are starting as a beginner with a new scanner.

My SD card started to work after reformat but also other SD cards worked straight away.

/Ubbe
 

AggieCon

Member
Premium Subscriber
Joined
Nov 25, 2015
Messages
1,448
Location
Texas
What did Whislter customer support say? Did you call them?

Also, this should help: Select

It's not specifically for the TRX-1, but the WS1080 and WS1088 are close enough in most ways that it will help. It's like the proper user guide Whistler meant to make but decided to save the money instead, relying on free customer support via others on Radio Reference.
 
Status
Not open for further replies.
Top