DSDPlus Trying to figure out how to set this NXDN system up in DSD+

[Whiskey3JMC]

One question that I haven't found answer to, can you set a TG to record?

Not aware of a way in DSD+ to only record one talkgroup & not the rest of the site (I'm sure I'll be promptly corrected if I'm wrong) SDRTrunk allows you to pick and choose talkgroups you want to listen to and record

Nevermind, no NXDN support (as of date of this posting) in SDRTrunk...

 

[dave3825]

Trunking recorder can import DSDPlus recordings.

 

[DaveNF2G]

Enable per-channel recording.

 

[rjdj2000]

Enable per-channel recording.

I saw that, can you specify the one TG or no? Didn't want to record the whole system. Went to github to look into trunk recorder but no windows install and hat to keep adding programs to do things. If anything can just enable it and then wipe out once a day so not a real big deal.

 

[dave3825]

Not trunk recorder. Trunking recorder. If you’re only interested in one tg, set all the others to L/O. If you can’t do that, and end up recording all tg’s, you can selectively play back any tg in trunking recorder.

 

[rjdj2000]

Not trunk recorder. Trunking recorder. If you’re only interested in one tg, set all the others to L/O. If you can’t do that, and end up recording all tg’s, you can selectively play back any tg in trunking recorder.

Why did I not think of L/O other TG in there.... DUH!! I went through the group file om my P25 system I ran it on and just changed Normal to L/O on groups I did not want to hear and it worked fine. Sometimes my mind just don't work like it should anymore. Maybe it is due to the clock repair I've been into lately. LOL

 

[dave3825]

I went through the group file om my P25 system I ran it on and just changed Normal to L/O on groups I did not want to hear and it worked fine.

Thought the system in question was a NXDN system?

Either way, while L/O will block all tg's in your groups file, any new tg's on the system will get thru and be recorded. Probably private calls also if any.

 

[rjdj2000]

Thought the system in question was a NXDN system?

Either way, while L/O will block all tg's in your groups file, any new tg's on the system will get thru and be recorded. Probably private calls also if any.

Yes, the system in question is a NXDN. I setup a folder to run this on my local P25 and saw somewhere about marking the TG with the L/O instead of Normal that it wouldn't do anything with them. When trying to figure this one out (NXDN) I overlooked that detail of the L/O.

Will go back through and L/O the other TG and set it to record and see what I get.

 

[cg]

If you keep getting new TGs that record, use the priority level threshold for TGs. The new groups come through at 50, Normal. Set your target group to below 50 and set the Monitoring Threshold in the Control tab something between that and 50