Twin City Ambulance

Status
Not open for further replies.

N2UEB

Member
Joined
Jan 15, 2017
Messages
2
Location
Lockport New york 14094
question: does anyone know what frequency that Twin city amb. has moved to? I see that some one has them on the broad cast page, and checked the erie co. page and they show old freq.s so they are out there somewhere.. I have a BCD 536 Thanks for any help..
 

N2UEB

Member
Joined
Jan 15, 2017
Messages
2
Location
Lockport New york 14094
Thanks for the info, the "Next Generation Digital Narrowband" leaves me out.. the ans. was there in front of me the hole time. I'de looked at that page mant a time, trying to figure it out..thanks for all the help
 

andyk62990

Member
Joined
May 17, 2010
Messages
200
Location
Nowhere, USA
No problem. Try getting a SDR, cheap, easy to use if your tech savy, and does NXDN and whole lot more.... or a whistler trx. I believe they do NXDN as well
 

K2BUFF

Member
Joined
Jul 7, 2015
Messages
24
Location
BUFFALO, NY
NXDN Encrypted??

Anyone have any info... I tried to listen to Twin City Ambulance Dispatch on NXDN with the RAN of 1 like is listed but I don't hear anything. I can see activity on the channel and hear digital noise when its open but I'm wondering if its encrypted.
 

K2BUFF

Member
Joined
Jul 7, 2015
Messages
24
Location
BUFFALO, NY
Twin city

Ok so I have tried 460.550 with RAN 1 and I’m still not picking anything up. Any ideas on what is going on?Im pretty good with a radio and am at a loss for words
 

k2hz

Member
Premium Subscriber
Joined
Feb 7, 2011
Messages
448
Location
Rochester, NY
I’m using a Kenwood NX-300 and also tried on another Kenwood
Do you have "Channel Spacing (NXDN)" set to "Narrow" or "Very Narrow"

I see from their FCC data that they are 8K30F1E (12.5 kHz NXDN) which is "Narrow" vs the more common 4K00F1E (6.25kHz NXDN) "Very Narrow".

I am not in the area so I don't know which mode they are actually using.

You might also be sure that "Optional Signaling (NXDN)" is "None"
 

K2BUFF

Member
Joined
Jul 7, 2015
Messages
24
Location
BUFFALO, NY
Twin City Amb

Thanks for the help. Don’t know why I didn’t think of that. It’s actually Very Narrow and I had it set to Narrow. Thanks again
 
Status
Not open for further replies.
Top