anyone hearing anything from twra in knox.area, I have all new freq.prog.
When they get on the TACN are they going to stay P25 Phase 1 or are they going to P25 phase 2.
The end result of TACN is to be Phase ll. Some of the agencies using TACN, in conjunction with TVRS, are still analog, especially the volunteer fire departments. Some of the large City and County agencies are using radios that will not do phase ll and that is why it is simulcast and will be for a time. It really depends on the radios the particular agency is using to determine if they can do phase ll, THP and supervisors of different emergency agencies are using APX radios, the others are using XTS radios (there are still MTS 2000 radios in use in some Departments). More than likely mutual aid and disaster channels will not be phase ll for a long time, due to agencies outside of the TACN system that work with agencies within the TACN system have just purchased radios that will not do phase ll, since they have their own comms and are not a part of TACN
Hope this helps
The TACN, of which TVR is a part of, is fully P25 Phase II (TDMA) compliant. It is using "friendship" mode so that Phase I (FDMA) radios can be used on the system. This will be the way of things for some time yes as radios are upgraded/switched out to TDMA compliant ones. TWRA is being issued radios that are Phase II compliant. ALL new radios on the system must be Phase II compliant. This does not mean that all users must use TDMA, just that they must be able to do so. Eventually, yes this will change to full TDMA, but this is still a few years off. The reason for TDMA? Simply it is much more efficient!
Friendship mode? That's a new one. I think you're looking for Dynamic Dual Mode.
Also supported on this system is:
Rainbow mode: statewide roaming access on each pot o' gold site.
Gumdrop subscriber packages: APX radios in neon pink & purple color cases
Oh, and don't forget the unicorn package upgrade which provides multiband antennas from 30 to 1300 MHz.
Just dogging on ya milf, thought I'd offer a little clarification for you in a creative way![]()