• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

TYT MD 390 issue

Status
Not open for further replies.
T

TheBoz

Member
Joined
Aug 27, 2015
Messages
63
Location
Vernon Co, Missouri
I have a UHF TYT MD 390 that I was going to reprogram with a few new frequencies to listen to (receive only), but when I turned it on, the display is upside down, it shows everything correct, it's just upside down, is there any way to reset, or fix this, I've never came across this on any of my TYT radios before. Thanks for any input.
 
C

chief21

Member
Premium Subscriber
Joined
Mar 2, 2004
Messages
1,800
Location
Summer - Western NC; Winter - Tampa Bay FL
I've read of this happening to others and I think it has to do with using the incorrect version of firmware for your particular radio. At the very least, you should be able to re-load the original firmware version to see if that resolves the problem.

Google it and see what others have done to fix it.

John
 
Status
Not open for further replies.

Similar threads

kc5igh
HELP! Major problem with ARC6 and Icom R6!
Replies
12
Views
575
Butelsoftware
Butelsoftware
N
Yaesu: Odd Audio issue with FT-897
Replies
4
Views
371
N3NTJ
N
KC1UA
UHF-T Band Yagi?
Replies
2
Views
261
KC1UA
KC1UA
T
LTR Controller issue
Replies
10
Views
1K
kayn1n32008
K
W
SDRTrunk and Raspberry 5 Audio issue
Replies
6
Views
391
will40
W
Top