• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

Uasd

Status
Not open for further replies.

teebee

Member
Joined
Dec 10, 2001
Messages
436
Location
Lake Charles, LA
I am setting up my local conventional system using UASD. In the group list of about 50 channels I forgot to add a channel (frequency and channel name). I would like to insert it in between channel 22 and 23. I notice under "Edit" there is an option Insert and Paste Channel. The problem is it is grayed out, so this must not be the option to use. Is there any way to do this without deleting channel 23 through 50 and retyping them all over again.
 

ofd8001

Member
Premium Subscriber
Joined
Feb 6, 2004
Messages
6,207
Location
Louisville, KY
It can be done.

1. Insert a new channel at the bottom.
2. Cut channels 23-50.
3. Insert the new channel in the old 23 position.
4. Paste the channels that you cut (23-50)
 
Status
Not open for further replies.
Top