• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Unable to Access Web Tool on Kenwood NXR-1800

W

WANTOSAWA

Newbie
Joined
Nov 10, 2025
Messages
4
Reaction score
5
Hello everyone,

I’m currently experiencing an issue with my Kenwood NXR-1800 repeater. I’m unable to access the Web Tool interface—the IP address cannot be detected from the radio.

Here’s what I’ve already tried:

Replaced the LAN cables

Reinstalled the software and license

Followed all available setup instructions carefully

Despite these steps, the Web Tool still won’t open or detect the device.

Has anyone encountered this issue before or can provide guidance on how to resolve it? Any help would be greatly appreciated.

Thank you in advance for your support.
 
kd4efm

kd4efm

Member
Premium Subscriber
Joined
Jul 14, 2002
Messages
3,128
Reaction score
1,271
Location
EL98 Florida
Web Tool?? Photos to help.
There's a little more to it than what you provided.
1 programming with D7 with RF info.
2 GUI interface to complete program functions
3 LMC to push license(s) to it via serial port

Help me out, your our layout on what you are trying to do. More details, the better we can assist.
 
W

WANTOSAWA

Newbie
Joined
Nov 10, 2025
Messages
4
Reaction score
5
I’m actually trying to program my radio with new channels, but now I can’t even access its IP address. I usually program it through a LAN cable (RJ45), but it’s not detecting anymore. I also need to configure some features using the Web Tool, yet even through the CPS, I still can’t connect to the radio
 

Attachments

  • photo_6093823660155145644_y.jpg
    photo_6093823660155145644_y.jpg
    82.8 KB · Views: 25
  • photo_6093823660155145642_y.jpg
    photo_6093823660155145642_y.jpg
    63.5 KB · Views: 17
  • photo_6093823660155145643_y.jpg
    photo_6093823660155145643_y.jpg
    80.1 KB · Views: 19
  • photo_6093823660155145648_y.jpg
    photo_6093823660155145648_y.jpg
    53.2 KB · Views: 22
  • photo_6093823660155145647_y.jpg
    photo_6093823660155145647_y.jpg
    106.2 KB · Views: 23
kd4efm

kd4efm

Member
Premium Subscriber
Joined
Jul 14, 2002
Messages
3,128
Reaction score
1,271
Location
EL98 Florida
1, spool up wireshark, and turn off wifi so you only have the repeater connected.
2, use https://192.168.0.1
3, was the admin port number changed by any chance?

I don't have a nxr1k to work with at this time, but let's start here first.
Also do you have the latest fw installed on the repeater?
 
A

AM909

Radio/computer geek
Premium Subscriber
Joined
Dec 10, 2015
Messages
1,650
Reaction score
701
Location
SoCal
Pics of the two screens before the IPv4 details (Ethernet Properties and something like Network Connections)?

When you plug the network cable into the LAN connector on the NXR, do the LEDs light up at the top left and right corners of that connector?
 
You must log in or register to reply here.
Top