• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Unication G4 Pager/Trunking Receiver

Status
Not open for further replies.

2wayfreq

Member
Joined
Jun 8, 2004
Messages
470
Location
Arizona
Hi,
I was looking at the specs on these. Can anyone confirm that they support Phase II Trunking? I just see "P25" Trunking. If not, I might as well go for a WS-1088.

Thanks!
 

Thunderknight

Member
Premium Subscriber
Joined
Jan 31, 2008
Messages
2,216
Location
Bletchley Park
Hi,
I was looking at the specs on these. Can anyone confirm that they support Phase II Trunking? I just see "P25" Trunking. If not, I might as well go for a WS-1088.

There is a whole Unication forum here at RR.
But they do not support Phase 2 YET. They have stated it is on the roadmap for the near future.
The big plus to the G4/G5 is the excellent support for simulcast.
 

radio3353

Active Member
Joined
Jul 25, 2003
Messages
1,497
Hi,
I was looking at the specs on these. Can anyone confirm that they support Phase II Trunking? I just see "P25" Trunking. If not, I might as well go for a WS-1088.

Thanks!

Glad you found us! Is the P25 Phase II system of your interest a simulcast system? If so, the WS-1088 will likely be useless and a waste of money. The Unication products appear to handle simulcast just fine so it is likely better to wait for Unication's Phase II support.
 
Status
Not open for further replies.
Top