Unication G4 talkgroup hold

[PVPD730]

Does the G4 have the capability of being set on one specific talkgroup at a time for monitoring?

For instance:

Zone 1 is labeled "System ABC-Fire North"
Talkgroup List: North Main, North Secondary, North Tactical 1, North Tactical 2


If I just wanted to monitor the North Main group, will I be able to select it via the channel knob and only monitor that TG or would it scan the whole list.

Thinking about purchasing one of these. Before I do, I would like to hear some user experiences. Some sources say it can be done, some say it can't.

Thanks

 

[BenScan]

If you only have that one talkgroup in a list, yes. Otherwise, it's going to scan through all talkgroups in the list for that position. You can make it a priority scan list, and put that one at the top. That's what I usually do. I have some zones set to one talkgroup per channel position, but I normally don't use those, unless there's a chase or something that I really want to focus on, without interruption.

 

[PVPD730]

If you only have that one talkgroup in a list, yes. Otherwise, it's going to scan through all talkgroups in the list for that position. You can make it a priority scan list, and put that one at the top. That's what I usually do. I have some zones set to one talkgroup per channel position, but I normally don't use those, unless there's a chase or something that I really want to focus on, without interruption.

Okay, that makes sense. Appreciate the response!