• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Unication G5 Pin

Status
Not open for further replies.

Synchro39

Member
Premium Subscriber
Joined
Feb 7, 2018
Messages
257
Location
Montreal Quebec
I'm trying to figure out the pin outs on the bottom of the G5 i want to bypass the speaker but want to use antenna and charger and just bypass the amplified speaker
 

Hit_Factor

Member
Joined
Mar 6, 2010
Messages
2,435
Location
Saint Joseph, MI
Why do you think the pin out isn't valid? Same charger works with all models. Thus, same pin out.

I'd open up the charger and disconnect the two speaker leads and hook up a speaker or oscilloscope to verify signal. Go from there.

Or

Cover the speaker pin with dielectric tape, drop it in the charger. Check to see if you are getting results you seek.
 

Synchro39

Member
Premium Subscriber
Joined
Feb 7, 2018
Messages
257
Location
Montreal Quebec
Why do you think the pin out isn't valid? Same charger works with all models. Thus, same pin out.

I'd open up the charger and disconnect the two speaker leads and hook up a speaker or oscilloscope to verify signal. Go from there.

Or

Cover the speaker pin with dielectric tape, drop it in the charger. Check to see if you are getting results you seek.

i tried your option #2 but no sound at all from base and not from pager
 
Last edited:

Synchro39

Member
Premium Subscriber
Joined
Feb 7, 2018
Messages
257
Location
Montreal Quebec
i presume as soon you connect it to the charger the G5 cut his sound i even try to unplug the speaker still no sound coming from the pager
 

radio3353

Active Member
Joined
Jul 25, 2003
Messages
1,497
Can you simply disconnect the leads to the amplified charger"s speaker to silence it?
 
Status
Not open for further replies.
Top