Uniden BR 330 TG identifiers

Status
Not open for further replies.

TEH

Member
Joined
May 2, 2003
Messages
22
Location
Central Florida
Hello from Central Florida,

Can anyone advise how I can get the scanner to display the text identifiers for frequencies and trunk talkgrouops?

In conventional scanning, the scanner displays the frequency and (on the top line) flashes the system name and scanlist/group name, but I can't get the radio to show the text identifier for the specific channel.

In trunk scanning, the scanner shows the talkgroup number, and flashes the system name and scanlist/group name, but I can't get the radio to show the text identifier for the specific talkgroup.

I have tried the "function-5" routine stated in the manual, but that does not change the display.

thanks for any help you can provide.
 

KE5MC

Member
Premium Subscriber
Joined
Dec 19, 2002
Messages
1,072
Location
Lewisville, TX
Hold mode

396 requires scanner to be in 'hold mode' to toggle the F-5 function. I suspect the 330 too.
 

torontokris

Member
Premium Subscriber
Joined
Feb 22, 2008
Messages
1,698
Location
Toronto Canada
Just to make sure you have programmed in the talkgroups text-tag?

They need to be programmed in (each and every one)

If they are progarmmed in then its possible the status bit is different then the TG you programmed in..
so you have 1616 progarmmed but it comes across on 1618.. im guessing it wont show (I maybe wrong)

If you tried Func-F5 already thats the only things I can think of.
 
Status
Not open for further replies.
Top