Unitrunker 1.0.0.24 Decoding Edacs as MPT1327

Status
Not open for further replies.

zzeus

Member
Joined
Apr 13, 2010
Messages
24
Recently I've updated Unitrunker to 1.0.0.24 and loaded my previous settings from 1.0.0.22 and I cant get it to recognize CC data from my BCD996XT as Edacs96 it's showning MPT1356 and health 0.

I also tried creatting new setting but with the same effect :(

Anybody else is having a simular issue?

Here are the logs.

Code:
<EDW,0,3F,14610B
Received chunk 32
<EDW,1,3F,040000
<EDW,0,3F,09FFFF
Received chunk 32
<EDW,1,3F,09FFFF
<EDW,0,3F,14610B
Received chunk 32
<EDW,1,3F,040000
<EDW,0,3F,08FFFF
Received chunk 32
<EDW,1,3F,08FFFF
<EDW,0,3F,0E3134
Received chunk 32
<EDW,1,3F,0E3134
<EDW,0,3F,14610B
Received chunk 32
<EDW,1,3F,040000
<EDW,0,3F,09FFFF
Received chunk 32
<EDW,1,3F,09FFFF
<EDW,0,3F,14610B
Received chunk 32
<EDW,1,3F,040000
<EDW,0,3F,08FFFF
Received chunk 32
<EDW,1,3F,08FFFF
<EDW,0,3F,14610B
Received chunk 32
<EDW,1,3F,040000
<EDW,0,3F,09FFFF
Received chunk 32
<EDW,1,3F,09FFFF
<EDW,0,3F,14610B
Received chunk 32
<EDW,1,3F,040000
<EDW,0,3F,08FFFF
Received chunk 32
<EDW,1,3F,08FFFF
<EDW,0,3F,14610B
Received chunk 32
<EDW,1,3F,040000

Code:
2011-12-09 00:39:20 			0 of 18 (0%)
2011-12-09 00:39:21 			0 of 18 (0%)
2011-12-09 00:39:22 			0 of 18 (0%)
2011-12-09 00:39:23 			0 of 18 (0%)
2011-12-09 00:39:24 			0 of 18 (0%)
2011-12-09 00:39:25 			0 of 18 (0%)
2011-12-09 00:39:26 			0 of 18 (0%)
2011-12-09 00:39:27 			0 of 18 (0%)
2011-12-09 00:39:28 			0 of 18 (0%)
2011-12-09 00:39:29 			0 of 18 (0%)
2011-12-09 00:39:30 			0 of 18 (0%)
2011-12-09 00:39:31 			0 of 18 (0%)
2011-12-09 00:39:32 			0 of 18 (0%)
2011-12-09 00:39:33 			0 of 18 (0%)
2011-12-09 00:39:34 			0 of 18 (0%)
2011-12-09 00:39:35 			0 of 18 (0%)
2011-12-09 00:39:36 			0 of 18 (0%)
2011-12-09 00:39:37 			0 of 18 (0%)
2011-12-09 00:39:38 			0 of 18 (0%)
2011-12-09 00:39:39 			0 of 18 (0%)
2011-12-09 00:39:40 			0 of 18 (0%)
2011-12-09 00:39:41 			0 of 18 (0%)
 

Attachments

Last edited:

SCPD

QRT
Joined
Feb 24, 2001
Messages
65,126
Location
Virginia
Recently I've updated Unitrunker to 1.0.0.24 and loaded my previous settings from 1.0.0.22 and I cant get it to recognize CC data from my BCD996XT as Edacs96 it's showing MPT1327 and health 0.
That sounded funny when I first read it.

Yes, at health zero, any of the decoders may appear.

I'll look into the issue of EDACS data not appearing.

I should point out to everyone that the version used by zzeus is a preview release which is why you haven't seen it announced here.
 
Status
Not open for further replies.
Top