Unitrunker 1.0.0.24 Decoding Edacs as MPT1327

[zzeus]

Recently I've updated Unitrunker to 1.0.0.24 and loaded my previous settings from 1.0.0.22 and I cant get it to recognize CC data from my BCD996XT as Edacs96 it's showning MPT1356 and health 0.

I also tried creatting new setting but with the same effect

Anybody else is having a simular issue?

Here are the logs.

<EDW,0,3F,14610B
Received chunk 32
<EDW,1,3F,040000
<EDW,0,3F,09FFFF
Received chunk 32
<EDW,1,3F,09FFFF
<EDW,0,3F,14610B
Received chunk 32
<EDW,1,3F,040000
<EDW,0,3F,08FFFF
Received chunk 32
<EDW,1,3F,08FFFF
<EDW,0,3F,0E3134
Received chunk 32
<EDW,1,3F,0E3134
<EDW,0,3F,14610B
Received chunk 32
<EDW,1,3F,040000
<EDW,0,3F,09FFFF
Received chunk 32
<EDW,1,3F,09FFFF
<EDW,0,3F,14610B
Received chunk 32
<EDW,1,3F,040000
<EDW,0,3F,08FFFF
Received chunk 32
<EDW,1,3F,08FFFF
<EDW,0,3F,14610B
Received chunk 32
<EDW,1,3F,040000
<EDW,0,3F,09FFFF
Received chunk 32
<EDW,1,3F,09FFFF
<EDW,0,3F,14610B
Received chunk 32
<EDW,1,3F,040000
<EDW,0,3F,08FFFF
Received chunk 32
<EDW,1,3F,08FFFF
<EDW,0,3F,14610B
Received chunk 32
<EDW,1,3F,040000

2011-12-09 00:39:20 			0 of 18 (0%)
2011-12-09 00:39:21 			0 of 18 (0%)
2011-12-09 00:39:22 			0 of 18 (0%)
2011-12-09 00:39:23 			0 of 18 (0%)
2011-12-09 00:39:24 			0 of 18 (0%)
2011-12-09 00:39:25 			0 of 18 (0%)
2011-12-09 00:39:26 			0 of 18 (0%)
2011-12-09 00:39:27 			0 of 18 (0%)
2011-12-09 00:39:28 			0 of 18 (0%)
2011-12-09 00:39:29 			0 of 18 (0%)
2011-12-09 00:39:30 			0 of 18 (0%)
2011-12-09 00:39:31 			0 of 18 (0%)
2011-12-09 00:39:32 			0 of 18 (0%)
2011-12-09 00:39:33 			0 of 18 (0%)
2011-12-09 00:39:34 			0 of 18 (0%)
2011-12-09 00:39:35 			0 of 18 (0%)
2011-12-09 00:39:36 			0 of 18 (0%)
2011-12-09 00:39:37 			0 of 18 (0%)
2011-12-09 00:39:38 			0 of 18 (0%)
2011-12-09 00:39:39 			0 of 18 (0%)
2011-12-09 00:39:40 			0 of 18 (0%)
2011-12-09 00:39:41 			0 of 18 (0%)

 

[SCPD]

Recently I've updated Unitrunker to 1.0.0.24 and loaded my previous settings from 1.0.0.22 and I cant get it to recognize CC data from my BCD996XT as Edacs96 it's showing MPT1327 and health 0.

That sounded funny when I first read it.

Yes, at health zero, any of the decoders may appear.

I'll look into the issue of EDACS data not appearing.

I should point out to everyone that the version used by zzeus is a preview release which is why you haven't seen it announced here.