Unitrunker and a BR330T

Status
Not open for further replies.

kd7ckq

Member
Joined
Dec 19, 2002
Messages
219
Location
No. AZ
I am having problems controling my BR330T. Below is my settings.
ComResarea.jpg


When I run Tuner it will control it. But, just using Unitrunker. I cannot get it to work right.

Bryan
 

kd7ckq

Member
Joined
Dec 19, 2002
Messages
219
Location
No. AZ
All my scanner shows is 'REMOTE MODE, KEYPAD LOCKED.'
I will see activity and nothing happens with the scanner. I tried this with a BCT15, BC246T and BR330T.
 

kd7ckq

Member
Joined
Dec 19, 2002
Messages
219
Location
No. AZ
Tuner will control the radio with the following settings.

MODEL DATA BITS
BR330T 8

PORT STOP BITS
COM1 1

Buad Rate PARITY
115200 None

I tried different setting with Tuner and it will not control the radio.
Same settings in Unitrunker [R]eceiver, just lock the radio up.
[L]isten settings are the same as above except it now allows me to change volume and squelch. Plus Park Mode settings.
Scanner beeps when a change is made but, immediately goes back into 'REMOTE MODE, KEYPAD LOCK' and stays there regardless of what activity Unitrunker sees.
 

kd7ckq

Member
Joined
Dec 19, 2002
Messages
219
Location
No. AZ
Solved it! I had all the TG's set to Listen: NO.
Time for a TIME-OUT. All is now working great.

Bryan
 

SCPD

QRT
Joined
Feb 24, 2001
Messages
0
Location
Virginia
Hi Bryan;

Under the [L]isten options, you can also set "Listen=ignore" telling the program to ignore the per-talkgroup and per-user Listen Yes/No settings.
 
Status
Not open for further replies.
Top