APX8000
Sarcastic Member
Trying to set up Unitrunker through the PSR-500 using the PC/IF to USB. On the receiver window, it will not let me select anything other than COMM0 for the port. Any ideas?
Unitrunker help...
- Thread starter APX8000
- Start date
- Status
Have you plugged in the USB cable before you started UT? Are the drivers installed? (i.e. can you upload/download to/from this scanner using programming software?)
After you plug in the USB cable, and before you start UT, hit Windows+Break on your keyboard and find your way to the Device Manager. Open up "Ports (COM & LPT)" and see what you have there. You should have something in there which references a "USB Serial Port" (that's what mine says in Windows 7 for my PSR500). If you don't have any proper com ports showing, you may need the drivers to be reinstalled. Starrsoft has them on his page, if I recall correctly.
After you plug in the USB cable, and before you start UT, hit Windows+Break on your keyboard and find your way to the Device Manager. Open up "Ports (COM & LPT)" and see what you have there. You should have something in there which references a "USB Serial Port" (that's what mine says in Windows 7 for my PSR500). If you don't have any proper com ports showing, you may need the drivers to be reinstalled. Starrsoft has them on his page, if I recall correctly.
fmon
Silent Key Jan. 14, 2012
Highpockets has a very nice guide on Unitrunker at this Utah wiki. UniTrunker Guide - UtahRadio
APX8000
Sarcastic Member
Thanks Jay. Reinstalled the drivers and it works like a charm.
- Status
