Unitrunker Unitrunker question

[nightowl66]

I'm going to set up unitrunker to listen to local OSP. I had it set up before on a older computer, now have newer laptop and new dongles. I also want to listen to county sheriff which is not on a trunked system. They are on 2 different DMR frequencies, 154.72500 and 155.07000 . I can listen to them with SDR sharp with the Simple DMR plugin but only one frequency at a time. Is there a way to scan both sheriff frequencies with unitrunker or SDR sharp?
I also have a old Uniden sportcat handheld. Is there a way to use that and go thru my laptop to listen to the sheriff frequencies?

 

[Unitrunker2]

Unitrunker does not decode DMR.

 

[moonbounce]

All you need is DSDPlus 1.101, create a scan list and it will scan and decode those 2 DMR frequencies. Also you can do it with one dongle.

 

[nightowl66]

All you need is DSDPlus 1.101, create a scan list and it will scan and decode those 2 DMR frequencies. Also you can do it with one dongle.

I have DSDPlus 1.101. Is there a write up somewhere on how to do this?

 

[mciupa]

It is explained in your Text Document in your DSD folder:

For all DMR systems (DMR, Cap+, Con+, TIII), only one channel record has
to be added to the DSDPlus.frequencies file for each RF channel.
You can use the channel number that corresponds to timeslot 1 or 2 and
DSD+ will use the same frequency information for the other timeslot.

 

[slicerwizard]

I have DSDPlus 1.101. Is there a write up somewhere on how to do this?

If you have DSD+ 1.101, you also have the FMP.txt file:

scanning

FMP can (slowly) scan frequencies

a frequency list, one frequency per line, should be placed in a file
named FMP.ScanList

the format of each line is:

frequency mode description

example:

450.1250 TIII Acme Radio

...