Unknown freq on Ski Summit site

[dw2872]

Does anyone know what the frequency/channel is for that is listed below the control channel on this site? The channel/freq listed in the screen shot is 01-2234 / 775.96875

I am thinking a repeater output or something like that?

 

[greenthumb]

My guess is that they have added a 700 MHz channel to that site. Input is +30 MHz.

 

[Mick]

Hi Dan, I've run Site 413 Ski Summit for the last 75 minutes and have not yet seen 775.96875 show up. I wonder if it's another anomaly for your version of Pro96 COM? I checked and am unable to locate an FCC license for 775.96875 anywhere in Colorado.

 

[dw2872]

It is a good chance it is an anomaly with this version but that is a 700 interoperability frequency. When I get a chance to get to that computer that it is on then I will stop and restart it to see. When I first saw that this morning I did just that and it kept populating with that freq at the bottom. The problem is that it does not fill in the usage type column so I thought that was strange.

Tonight I am going to try to go back to the same version you have. I am tired of seeing things that might not be there.

Thanks for looking, Mick.

 

[ecps92]

Bad Data as it is outside of the 700 Band Limits
700 MHz Public Safety Band Plan - The RadioReference Wiki

Does anyone know what the frequency/channel is for that is listed below the control channel on this site? The channel/freq listed in the screen shot is 01-2234 / 775.96875

I am thinking a repeater output or something like that?

 

[dw2872]

This is where I found this frequency listed after I saw it on my (apparently faulty) Pro96Com...

INTER-OPERABILITY CHANNELS FOR LOCAL/STATE/FEDERAL AGENCIES

Down towards the bottom of the list in the middle column.

 

[ecps92]

IF I recall there were changes to the 700 band after the 2008 date of that web page

This is where I found this frequency listed after I saw it on my (apparently faulty) Pro96Com...

INTER-OPERABILITY CHANNELS FOR LOCAL/STATE/FEDERAL AGENCIES

Down towards the bottom of the list in the middle column.

 

[dw2872]

That makes sense. I will definitely regress to the older ProScan version that Mick is using and see what happens.

 

[Steve2003]

The frequency will continue to show up in Pro96Com until you remove it from your Tower004013.txt file. If the frequency appears again then it might be worth researching further.

I run several instances of Pro96Com at the same time so screen space is a previous commodity. I'll periodically remove frequencies that have zero hit counts to conserve space (depending on your Pro96Com settings hit counts may not save between logging sessions).

 

[dw2872]

That's awesome info and advice. I'll delete the freq or the whole tower file and see what happens. Thanks!

 

[Mick]

Hi Dan, Just got home, Pro96COM has been running six hours on Site 413 and the 775 MHz freq never showed up. Just a quick thanks to my buddy Brian who got me started with Pro96COM in the last year or two, it's great.