With rebanding now in progress, there seems to be some people that are confused as to what needs to be done to update scanners for the change. I wasn't even sure until just a couple weeks ago. Its really quite simple, all control channels that are currently above 865mhz will be lowered by 15mhz. All you need to do is go through and subtract 15mhz off of each control channel. (primary and alternate) Since I've already updated my scanner, I figured I would go ahead and make it a little easier for everyone and post the frequencies for the systems that most of us here in the metro probably listen to the most.
After rebanding, the control channel frequencies will be as follows:
101 Metro:
I don't believe there will be any changes to the Metro system since all channels are below 865mhz.
109 Minneapolis:
852.0375
852.1375
853.1625
853.8125
102 Anoka Co:
853.3875
851.9375
852.3875
852.8875
201 East Hennepin:
852.1625
852.2875
852.3625
853.8375
202 West Hennepin:
852.2625
852.6125
853.6375
853.8875
203 Ramsey Co:
852.0875
852.3625
853.7125
853.7625
107 Washington Co: (Already rebanded on 4-1)
853.7375
852.7875
853.1875
106 Cambridge/North Branch:
845.2625
852.4625
853.0500
104 Carver Co:
852.4375
851.8875
851.0750
853.7875
103 Dakota Co:
851.1625
853.0625
853.3125
853.5625
You can go ahead and program the new frequencies along with the current ones, your scanner will find them when they become active. Just make sure you don't delete the old frequencies on each system until after that system is rebanded.
After rebanding, the control channel frequencies will be as follows:
101 Metro:
I don't believe there will be any changes to the Metro system since all channels are below 865mhz.
109 Minneapolis:
852.0375
852.1375
853.1625
853.8125
102 Anoka Co:
853.3875
851.9375
852.3875
852.8875
201 East Hennepin:
852.1625
852.2875
852.3625
853.8375
202 West Hennepin:
852.2625
852.6125
853.6375
853.8875
203 Ramsey Co:
852.0875
852.3625
853.7125
853.7625
107 Washington Co: (Already rebanded on 4-1)
853.7375
852.7875
853.1875
106 Cambridge/North Branch:
845.2625
852.4625
853.0500
104 Carver Co:
852.4375
851.8875
851.0750
853.7875
103 Dakota Co:
851.1625
853.0625
853.3125
853.5625
You can go ahead and program the new frequencies along with the current ones, your scanner will find them when they become active. Just make sure you don't delete the old frequencies on each system until after that system is rebanded.
Last edited: