Verdugo

[jwilli187]

I program verdugo fire in my unit and BCD 436 but can't hear anything I have monitor on any any help would be greatly appreciated

 

[AM909]

Probably going to need more info to help. Where are you? What do you have for an antenna? What channels/frequencies are you listening to?

 

[ladn]

I program verdugo fire in my unit and BCD 436 but can't hear anything I have monitor on any any help would be greatly appreciated

Are you trying to monitor the VHF "Red" frequency rebroadcast or the UHF ICI trunked system?

 

[jwilli187]

Probably going to need more info to help. Where are you? What do you have for an antenna? What channels/frequencies are you listening to?

I'm new to programming and this was the first time trying this type of system. I downloaded Verdugo from the ICI list.. I did notice some traffic while driving around today.
Question. Will I only hear it if I'm in the area?
Thank you

 

[jwilli187]

Oh yeah I'm in the Long Beach area most of the time

 

[ladn]

Question. Will I only hear it if I'm in the area?

Your reception will depend on what repeater sites and talk groups you program. Verdugo Fire RED 1 is the dispatch channel and it has lots of traffic.

Your reception quality will also be predicated on your antenna and physical location (especially if you are in a well shielded building.

As a test, you could monitor a Broadcastify Verdugo RED 1 feed on your cell side-by-side with your scanner. NOTE the Broadcastify feed will be out of phase with your scanner reception by a couple of seconds.

 

[jwilli187]

Are you trying to monitor the VHF "Red" frequency rebroadcast or the UHF ICI trunked system?

ICI

 

[ladn]

Also try monitoring the RED 1 rebroadcast patch at 154.37000 .

 

[Code20Photog]

I'm in the South Bay and hear Verdugo better than almost anything.

 

[robertjoyner]

Also try monitoring the RED 1 rebroadcast patch at 154.37000 .

As of August 2022, the VHF rebroadcast in the clear of Verdugo Dispatch is offline...