BC125AT: Version 1.04.02 PC Connection

Status
Not open for further replies.

alpikecp

Member
Joined
Jul 12, 2016
Messages
3
Location
Minnetonka, MN
I have followed these directions:

>>>>>Windows 8.x and later (including Windows 10): Download and unzip the following file: Windows_Serial_Drivers.zip to a folder on your PC.

Plug the scanner into a USB port. When prompted for a driver, select the uniden_usbser.inf file. >>>

When I plug the scanner (on) into a USB port I do not get the prompted to select the file. My PC does not see the scanner.

The Uniden website support section does not list the BC125AT in the drop down menu to get support from them directly.
 

UPMan

In Memoriam
Uniden Representative
Joined
Apr 19, 2004
Messages
13,296
Location
Arlington, TX
Plug in the scanner and look in Device Manager on your PC. You will likely see a device with a yellow triangle next to it. You can confirm that it is associated with the scanner by unplugging / replugging the scanner (that device will disappear/reappear). Right click on that device and choose Update Driver Software, then select the correct driver when prompted.
 
Status
Not open for further replies.
Top