• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Vertex VX-537-4-5 Help!!

Status
Not open for further replies.

carlos7801

Member
Premium Subscriber
Joined
May 21, 2020
Messages
41
Location
Lawrence MA
Hello to all reading this post. And yes as rare as this is I have two units purchased in a lot for a great deal. Anywho, one of the units is in working order no issues, even installed my VMDE-200 Board and it works flawlessly. With the second unit pictured with no antenna and no belt clip, tha battery attatchment tab is stuck, and won't budge at al and any help to maybe get it to move other than flathead (already tried several). Any help would be greatly appreciated amongst all of you! Hope everyone's safe!
 

Attachments

  • 176869828_210305090523893_8103414331805252893_n.jpg
    176869828_210305090523893_8103414331805252893_n.jpg
    92.6 KB · Views: 18
  • 176769529_134719125330518_6898213952633466751_n.jpg
    176769529_134719125330518_6898213952633466751_n.jpg
    35.7 KB · Views: 20
  • 176637202_800299157560078_2544389593066263029_n.jpg
    176637202_800299157560078_2544389593066263029_n.jpg
    119.6 KB · Views: 18
Status
Not open for further replies.
Top