• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Vhf help

Status
Not open for further replies.

rcfd34

Member
Joined
Dec 1, 2011
Messages
52
Location
Dakota IL
Just got a kenwood tk 7180 vhf i need an antenna for my 01 tahoe will be running freq in the 154 to 159 any one have any suggestions dont mind drilling if i have to looking to spend no more then 60 to 70 bucks so used new dont matter dont really no alot about the antennas dont want anything with a super long whip would like it under 16 inches if possible thanks
 

n9mxq

Member
Premium Subscriber
Joined
Dec 15, 2005
Messages
1,840
Location
Belvidere IL
Any quarter wave NMO will do decent for you, but a 5/8th wave would be your best bet. But you'll have clearance issues. I recommend Larsen with the NMO mount. I've had one for years, and have beat the living snot out of it and it's never failed.

A quick Google search will find them, or a vendor for them.
 

n9mxq

Member
Premium Subscriber
Joined
Dec 15, 2005
Messages
1,840
Location
Belvidere IL
With that size of vehicle, unless you go to a tailgate mounted antenna, you're pretty much stuck with the 1/4 wave.. They're easy enough to install and tune. Just not a lot of gain.

Get one, and put it as close to dead center on the roof. If there's a light in the headliner in that general area you're set. Pop the light out, drill, feed your coax to the radio (the tricky part). Tune the antenna and you're all set.
 

rcfd34

Member
Joined
Dec 1, 2011
Messages
52
Location
Dakota IL
Yea i have no idea how to tune lol im all new to this radio stuff i do have a light but cant mount an antenna there theres a lightbar in the way
 

n9mxq

Member
Premium Subscriber
Joined
Dec 15, 2005
Messages
1,840
Location
Belvidere IL
Well, you're in Ridott. I'm not all that far away. You get the mount and antenna.. and I can help you out with the install and tuning.

How's that strike ya?
 

n9mxq

Member
Premium Subscriber
Joined
Dec 15, 2005
Messages
1,840
Location
Belvidere IL
Belvidere. Go to eBay, or Amazon. Do a search for 3/8 nmo mount. Then search for VHF NMO Quarter wave.. They're dead simple antennas, and hard to screw up even for the cheaper manufacturers.
 

rcfd34

Member
Joined
Dec 1, 2011
Messages
52
Location
Dakota IL
Ok sounds good im looking at some of laird ones i no my uncle always said they were good ones he use to be big in the ham stuff and radios
 

rcfd34

Member
Joined
Dec 1, 2011
Messages
52
Location
Dakota IL
Now does it matter what size coax it uses is it like the satellite cable they run in house like rg6 or what
 

rcfd34

Member
Joined
Dec 1, 2011
Messages
52
Location
Dakota IL
Ok cuz i was gonna say if u can use rg6 i got all kinds of that and all the tools to make it w.e length and strip ends lol
 

n9mxq

Member
Premium Subscriber
Joined
Dec 15, 2005
Messages
1,840
Location
Belvidere IL
RG6 is 75 ohm coax, RG58 is 50 ohm.. Your radio wouldn't like 75 ohm for long..
 

rescue161

KE4FHH
Database Admin
Joined
Jun 5, 2002
Messages
3,634
Location
Hubert, NC
I thought that too, but out of all of the ones that I've had, none needed tuning. They were all flat across my entire range. I swept them with my service monitor and the return loss was very good.
 

rescuecomm

Member
Joined
Jun 20, 2005
Messages
1,445
Location
Travelers Rest, SC
I ran my lightbar, 100 watt siren and 50 watt radio off of a single #6 wire that was fused 50 amps at the battery. Never had a problem with it. The 100 watt sirens will pull 15 to 18 amps by themselves, so you will need some good wire. I get my wire and fuse components in the car stereo shops. They have everything you need for a power hungry installation.

Bob
 
Status
Not open for further replies.
Top