• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

visar battery impres charger

Status
Not open for further replies.

kb8srx

Member
Premium Subscriber
Joined
Nov 10, 2007
Messages
18
Location
Ypsilanti, Michigan
Hey guys, I just purchased a brand new visar battery model AP-7395h Ni-MY 7.2 V 2000mAh and the adapter for my impres charger, yet when I set the battery in the charger, nothing happens (no charging, no lights) is there something else I need to do ? I don't really want to buy a separate charger just for the KVL3000.

Any help ideas would be appreciated.
 

kb8srx

Member
Premium Subscriber
Joined
Nov 10, 2007
Messages
18
Location
Ypsilanti, Michigan
Motorola makes an adapter for the impres charger for the visar battery, but apparently, only certain impres chargers from what I am learning, and mine is NOT one of them, so I just had to buy a visar charger.
 
Status
Not open for further replies.
Top