To anyone looking to acquire commercial radio programming software:

Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

To obtain Motorola software see the Sticky in the Motorola forum.

The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

VX-3000 UHF No Audio on Transmit

Thread starter ca229h
Start date Feb 7, 2020
Tags

imnospaz yaesu vx-3000

Status: Not open for further replies.

ca229h

Newbie

Feb 7, 2020

Hello Ya'll and Happy Friday! So I've got a Yaesu VX-3000 UHF radio from a friend and was trying to program GMRS frequencies on it. I got the frequencies downloaded to the radio alright. I can receive coming from my Yaesu VX-261 handheld but when I transmit with Vx3000 there is no audio! The display shows TX and i can receive something in the VX261 HT but can not hear my voice. I tried changing the DCS and CTCSS but to no avail. Any idea what is wrong with the settings I put in? Ive attached a screen shot of the frequencies and settings I did on the programming software. Thanks in advance and 73!

PS. I read one member (Imnospaz) was on the same boat as I am and he was able to solve the problem. I just can't reply to his thread from 2016 anymore. If you're reading this ImNoSpaz I would appreciate your response.