I'm having a problem with the VX-354 VHF radios and 2 tone signaling. I'm trig to set up two channels with 2 tone paging and Plectron tones. The first is on 154.190 with a ccts of 167.9 and a tone set of 910 and 1985. The second is on 155.160 with a ccts of 192.8 and a tone set of 910 and 1130. The dispatch console sends out the tones at .75 and 2nd at .25. tone set. When the tones are sent out the led will blink green and the receive bars will show reception. The radio will not un-mute and go to monitor. The display does not show call after the tones are sent out. I have tried several things but nothing works
-
To anyone looking to acquire commercial radio programming software:
Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.
If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.
To obtain Motorola software see the Sticky in the Motorola forum.
The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.
For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).
This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.
vx 354 2 tone help
- Thread starter dmbasb
- Start date
