• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Wanting to make my own base.

Status
Not open for further replies.

bowser22

Member
Joined
Jan 25, 2010
Messages
65
I have a small fleet of vehicles for my towing company, I'd like to possibly invest in making my own trunking network with a base station and mobile radios. Anyone ever doen this before? Would it be too explenisve?
Thanks!
 

fineshot1

Member
Joined
Sep 17, 2004
Messages
2,517
Location
NJ USA (Republic of NJ)
Basic Answer

1. If you have a small fleet of vehicles why would you need an entire trunk system?

2. If you only have one base station you cant make a trunk system other than a
single channel LTR repeater and that pretty much defeats the purpose of having
a trunk system since it will be a single channel.

3. In order to build a trunk system(in most cases) you need multiple base stations
at multiple sites all controlled via a common controller.

Yes - very very expensive.
 
Status
Not open for further replies.
Top